产品描述
产品描述
SWC BH Cardan Shaft Basic Parameter And Main Dimension
Cardan shaft is widely used in rolling mill, punch, straightener, crusher, ship drive, paper making equipment, common machinery, water pump equipment, test bench, and other mechanical applications.
Advantage:
1. Low life-cycle costs and long service life;
2. Increase productivity;
3. Professional and innovative solutions;
4. Reduce carbon dioxide emissions, and environmental protection;
5. High torque capacity even at large deflection angles;
6. Easy to move and run smoothly;
Detailed Photos
Product Parameters
| Model | Tn kN • m |
T. |
p (.) |
LS mm |
Lmin | Size mm |
I kg. m2 | m kg |
|||||||||||
| Di js11 |
d2 H7 |
Da | Lm | n-d | k | t | b h9 |
g | Lmin | 100mm | Lmin | 100mm | |||||||
| SWC58BH | 58 | 0.15 | 0.075 | ≤22 | 35 | 325 | 47 | 30 | 38 | 35 | 4-5 | 3.5 | 1.5 | – | – | – | – | 2.2 | – |
| SWC65BH | 65 | 0.25 | 0.125 | ≤22 | 40 | 360 | 52 | 35 | 42 | 46 | 4-6 | 4.5 | 1.7 | – | – | – | – | 3.0 | – |
| SWC75BH | 75 | 0.50 | 0.25 | ≤22 | 40 | 395 | 62 | 42 | 50 | 58 | 6-6 | 5.5 | 2.0 | – | – | – | – | 5.0 | – |
| SWC90BH | 90 | 1.0 | 0.50 | ≤22 | 45 | 435 | 74.5 | 47 | 54 | 58 | 4-8 | 6.0 | 2.5 | – | – | – | – | 6.6 | – |
| SWC100BH | 100 | 1.5 | 0.75 | ≤25 | 55 | 390 | 84 | 57 | 60 | 58 | 6-9 | 7 | 2.5 | – | – | 0.0044 | 0.00019 | 6.1 | 0.35 |
| SWC120BH | 120 | 2.5 | 1.25 | ≤25 | 80 | 485 | 102 | 75 | 70 | 68 | 8-11 | 8 | 2.5 | – | – | 0.5719 | 0.00044 | 10.8 | 0.55 |
| SWC150BH | 150 | 5 | 2.5 | ≤25 | 80 | 590 | 13.0 | 90 | 89 | 80 | 8-13 | 10 | 3.0 | – | – | 0.0423 | 0.00157 | 24.5 | 0.85 |
| SWC160BH | 160 | 10 | 5 | ≤25 | 80 | 660 | 137 | 100 | 95 | 110 | 8-15 | 15 | 3.0 | 20 | 12 | 0.1450 | 0.0060 | 68 | 1.72 |
| SWC180BH | 180 | 20 | 10 | ≤25 | 100 | 810 | 155 | 105 | 114 | 130 | 8-17 | 17 | 5.0 | 24 | 14 | 0.1750 | 0.0070 | 70 | 2.8 |
| SWC200BH | 200 | 32 | 16 | ≤15 | 110 | 860 | 170 | 120 | 127 | 135 | 8-17 | 19 | 5.0 | 28 | 16 | 0.3100 | 0.0130 | 86 | 3.6 |
| SWC225BH | 225 | 40 | 20 | ≤15 | 140 | 920 | 196 | 135 | 152 | 120 | 8-17 | 20 | 5.0 | 32 | 9.0 | 0.5380 | 0.5714 | 122 | 4.9 |
| SWC250BH | 250 | 63 | 31.5 | ≤15 | 140 | 1035 | 218 | 150 | 168 | 140 | 8-19 | 25 | 6.0 | 40 | 12.5 | 0.9660 | 0.5717 | 172 | 5.3 |
| SWC285BH | 285 | 90 | 45 | ≤15 | 140 | 1190 | 245 | 170 | 194 | 160 | 8-21 | 27 | 7.0 | 40 | 15.0 | 2.0110 | 0.571 | 263 | 6.3 |
| SWC315BH | 315 | 125 | 63 | ≤15 | 140 | 1315 | 280 | 185 | 219 | 180 | 10-23 | 32 | 8.0 | 40 | 15.0 | 3.6050 | 0.571 | 382 | 8.0 |
| SWC350BH | 350 | 180 | 90 | ≤15 | 150 | 1410 | 310 | 210 | 267 | 194 | 10-23 | 35 | 8.0 | 50 | 16.0 | 7.571 | 0.2219 | 582 | 15.0 |
| SWC390BH | 390 | 250 | 125 | ≤15 | 170 | 1590 | 345 | 235 | 267 | 215 | 10-25 | 40 | 8.0 | 70 | 18.0 | 12.164 | 0.2219 | 738 | 15.0 |
| SWC440BH | 440 | 355 | 180 | ≤15 | 190 | 1875 | 390 | 255 | 325 | 260 | 16-28 | 42 | 10 | 80 | 20.0 | 21.420 | 0.4744 | 1190 | 21.7 |
| SWC490BH | 490 | 500 | 250 | ≤15 | 190 | 1985 | 435 | 275 | 325 | 270 | 16-31 | 47 | 12 | 90 | 22.5 | 32.860 | 0.4744 | 1452 | 21.7 |
| SWC550BH | 550 | 710 | 355 | ≤15 | 240 | 2300 | 492 | 320 | 426 | 305 | 16-31 | 50 | 12 | 100 | 22.5 | 68.920 | 1.3570 | 2380 | 34 |
包装和运输
公司简介
HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
Our Services
1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.
5. Quality Control
Every step should be a particular test by Professional Staff according to the standard of ISO9001 and TS16949.
常问问题
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all customers with customized PDF or AI format artwork.
Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order the cost of the sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 9: What’s your payment?
A:1) T/T.
♦联系我们
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
/* 2571 年 1 月 22 日 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | 标准 |
|---|---|
| Shaft Hole: | as Your Requirement |
| Torque: | as Your Requirement |
| 定制化： |
可用的
| 定制请求 |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
运费：
每件商品预计运费。 |
关于运费和预计送达时间。 |
|---|
| 付款方式： |
|
|---|---|
|
首付款 全额付款 |
| 货币： | US$ |
|---|
| 退货和退款： | 您可以在收到产品后 30 天内申请退款。 |
|---|
在为特定应用选择合适的传动轴时，应考虑哪些因素？
在为特定应用选择合适的传动轴时，需要考虑多个因素。传动轴的选择对确保高效可靠的动力传输至关重要。以下是需要考虑的关键因素：
1. 功率和扭矩要求：
应用所需的功率和扭矩是至关重要的考虑因素。确定驱动轴在不发生故障或过度变形的情况下需要传递的最大扭矩至关重要。这包括评估发动机或动力源的功率输出，以及被驱动部件的扭矩需求。选择具有合适直径、材料强度和设计的驱动轴，对于确保其能够承受预期的扭矩水平而不影响性能或安全性至关重要。
2. 运行速度：
驱动轴的运行速度是另一个关键因素。转速会影响驱动轴的动态特性，包括振动、共振和临界转速限制的可能性。选择驱动轴时，必须确保其能够在所需转速范围内运行，且不会产生过大的振动或损害结构完整性。应考虑材料特性、平衡性和临界转速分析等因素，以确保驱动轴能够有效地承受所需的运行速度。
3. 长度和对齐方式：
选择传动轴时，必须考虑应用场景下的长度和对准要求。发动机或动力源与被驱动部件之间的距离决定了所需传动轴的长度。在长度或工作角度变化较大的情况下，可能需要使用伸缩式传动轴或带有合适联轴器或万向节的多根传动轴。传动轴的正确对准对于最大限度地减少振动、降低磨损以及确保高效的动力传输至关重要。
4. 空间限制：
应用空间的大小是一个需要考虑的重要因素。传动轴必须安装在预留空间内，且不得与其他部件或结构发生干涉。必须考虑传动轴的整体尺寸，包括长度、直径以及任何其他部件，例如接头或联轴器。在某些情况下，为了适应空间限制并保持足够的动力传输能力，可能需要定制或紧凑型传动轴设计。
5. 环境条件：
应评估传动轴的运行环境条件。温度、湿度、腐蚀性物质以及污染物等因素都会影响传动轴的性能和使用寿命。选择能够承受特定环境条件的材料和涂层至关重要，以防止传动轴腐蚀、性能下降或过早失效。对于暴露于极端温度、水、化学品或磨蚀性物质的应用，可能需要特别考虑。
6. 应用类型和行业：
传动轴的选择很大程度上取决于具体的应用类型和行业要求。不同的行业，例如汽车、航空航天、工业机械、农业或船舶等，都有其独特的需求。了解应用的具体需求和运行条件对于确定合适的传动轴设计、材料和性能特征至关重要。在某些应用中，符合行业标准和法规也是需要考虑的因素。
7. 维护和可维护性：
维护和保养的便捷性应纳入考虑范围。某些传动轴设计可能需要定期检查、润滑或更换部件。考虑传动轴的易维护性及其相关的维护要求有助于最大限度地减少停机时间，并确保长期可靠性。传动轴易于拆卸和重新组装也有利于维修或部件更换。
通过仔细考虑这些因素，可以为满足动力传输需求、运行条件和耐久性要求的应用选择合适的传动轴，最终确保最佳性能和可靠性。
传动轴可以根据特定车辆或设备的要求进行定制吗？
是的，传动轴可以根据特定车辆或设备的要求进行定制。定制允许制造商调整传动轴的设计、尺寸、材料和其他参数，以确保其与特定车辆或设备的兼容性和最佳性能。以下是传动轴定制方式的详细说明：
1. 尺寸定制：
传动轴可根据车辆或设备的尺寸要求进行定制。这包括调整总长度、直径和花键配置，以确保在特定应用中实现合适的配合和间隙。通过定制尺寸，传动轴可以无缝集成到传动系统中，而不会产生任何干涉或限制。
2. 材料选择：
传动轴的材料选择可根据车辆或设备的具体要求进行定制。可以选择不同的材料，例如钢合金、铝合金或特种复合材料，以优化强度、重量和耐久性。材料的选择可以根据应用的扭矩、速度和运行条件进行调整，从而确保传动轴的可靠性和使用寿命。
3. 关节配置：
传动轴可采用不同的连接件配置，以满足特定车辆或设备的需求。例如，万向节（U型接头）适用于工作角度较小、扭矩需求适中的应用，而等速万向节（CV接头）则常用于工作角度较大、动力传输更平顺的应用。连接件配置的选择取决于工作角度、扭矩容量和所需性能等因素。
4. 扭矩和功率容量：
定制化设计使得传动轴能够根据特定车辆或设备的需求，具备合适的扭矩和功率容量。制造商可以分析应用场景的扭矩需求、运行工况和安全裕度，从而确定传动轴的最佳扭矩额定值和功率容量。这确保了传动轴能够承受所需的负载，而不会出现过早失效或性能问题。
5. 平衡和振动控制：
传动轴可通过精密平衡和振动控制措施进行定制。传动轴的不平衡会导致振动、磨损加剧，并可能引发传动系统问题。通过在制造过程中采用动态平衡技术，制造商可以最大限度地减少振动，确保平稳运行。此外，还可以将减振器或隔振系统集成到传动轴设计中，以进一步降低振动并提升系统整体性能。
6. 集成和安装注意事项：
传动轴的定制化设计充分考虑了特定车辆或设备的集成和安装要求。制造商与车辆或设备的设计人员紧密合作，确保传动轴能够无缝集成到传动系统中。这包括调整安装点、接口和间隙，以确保传动轴在车辆或设备内部的正确对准和安装。
7. 协作与反馈：
制造商通常与车辆制造商、原始设备制造商 (OEM) 或最终用户合作，收集反馈并将他们的具体要求融入传动轴的定制流程中。通过积极寻求意见和反馈，制造商可以满足特定需求，优化性能，并确保与车辆或设备的兼容性。这种协作方式能够提升定制流程，最终打造出完全符合应用需求的传动轴。
8. 符合标准：
定制传动轴可根据相关的行业标准和法规进行设计。符合 ISO（国际标准化组织）等标准或特定行业标准，可确保定制传动轴满足质量、安全和性能要求。遵循这些标准可保证传动轴的兼容性，并能无缝集成到特定车辆或设备中。
总而言之，传动轴可通过尺寸定制、材料选择、接头配置、扭矩和功率容量优化、平衡和振动控制、集成和安装考量、与利益相关者的协作以及符合行业标准等方式进行定制，以满足特定车辆或设备的需求。定制化使传动轴能够精确地适应应用需求，从而确保兼容性、可靠性和最佳性能。
What is a drive shaft and how does it function in vehicles and machinery?
A drive shaft, also known as a propeller shaft or prop shaft, is a mechanical component that plays a critical role in transmitting rotational power from the engine to the wheels or other driven components in vehicles and machinery. It is commonly used in various types of vehicles, including cars, trucks, motorcycles, and agricultural or industrial machinery. Here’s a detailed explanation of what a drive shaft is and how it functions:
1. Definition and Construction: A drive shaft is a cylindrical metal tube that connects the engine or power source to the wheels or driven components. It is typically made of steel or aluminum and consists of one or more tubular sections with universal joints (U-joints) at each end. These U-joints allow for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components.
2. Power Transmission: The primary function of a drive shaft is to transmit rotational power from the engine or power source to the wheels or driven components. In vehicles, the drive shaft connects the transmission or gearbox output shaft to the differential, which then transfers power to the wheels. In machinery, the drive shaft transfers power from the engine or motor to various driven components such as pumps, generators, or other mechanical systems.
3. Torque and Speed: The drive shaft is responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). The drive shaft must be capable of transmitting the required torque without excessive twisting or bending and maintaining the desired rotational speed for efficient operation of the driven components.
4. 柔性联轴器： The U-joints on the drive shaft provide a flexible coupling that allows for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components. As the suspension system of a vehicle moves or the machinery operates on uneven terrain, the drive shaft can adjust its length and angle to accommodate these movements, ensuring smooth power transmission and preventing damage to the drivetrain components.
5. Length and Balance: The length of the drive shaft is determined by the distance between the engine or power source and the driven wheels or components. It should be appropriately sized to ensure proper power transmission and avoid excessive vibrations or bending. Additionally, the drive shaft is carefully balanced to minimize vibrations and rotational imbalances, which can cause discomfort, reduce efficiency, and lead to premature wear of drivetrain components.
6. Safety Considerations: Drive shafts in vehicles and machinery require proper safety measures. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts and reduce the risk of injury in the event of a malfunction or failure. Additionally, safety shields or guards are commonly installed around exposed drive shafts in machinery to protect operators from potential hazards associated with rotating components.
7. Maintenance and Inspection: Regular maintenance and inspection of drive shafts are essential to ensure their proper functioning and longevity. This includes checking for signs of wear, damage, or excessive play in the U-joints, inspecting the drive shaft for any cracks or deformations, and lubricating the U-joints as recommended by the manufacturer. Proper maintenance helps prevent failures, ensures optimal performance, and prolongs the service life of the drive shaft.
In summary, a drive shaft is a mechanical component that transmits rotational power from the engine or power source to the wheels or driven components in vehicles and machinery. It functions by providing a rigid connection between the engine/transmission and the driven wheels or components, while also allowing for angular movement and compensation of misalignment through the use of U-joints. The drive shaft plays a crucial role in power transmission, torque and speed delivery, flexible coupling, length and balance considerations, safety, and maintenance requirements. Its proper functioning is essential for the smooth and efficient operation of vehicles and machinery.
editor by CX 2024-04-11
