Produktbeskrivning
Customized High Precision Spare Parts Auto/Truck/Drive/Gear/Spline/Propeller/Half/Sleeve/Machinery/Sliding/Transmission Axle Shaft 42CrMo 20CrMoTi
(1) Accessory products of the truck, the product quality is stable and reliable.
(2) Forged with 42CrMo material and heat treated and tempered for 32 degrees, so that the half shaft has stronger toughness and is not easy to break and bend.
(3) Processed in the machining center, ensure that the products have rigorous dimensional coordinates to ensure 100% qualified rate of products.
(4) Products are inspected 1 by 1 and delivered out of the warehouse, with unified laser identification to ensure product traceability.
(5) Various sizes of axle shafts can be customized to meet customer needs.
(6) The unified brand carton, inner bag and integral foam packaging, which is strong and beautiful.
Factory Show
More Products
| Truck Model | Sinotruk, Shacman, CZPT Auman, CZPT Xihu (West Lake) Dis., Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.feng Liuqi Balong, North BENZ( BEIBEN), C&C, JAC, etc. | |
| Product catalogue | Axle | Wheel Assembly |
| Differential Assembly | ||
| Main Reducer Assembly | ||
| Inner Ring Gear& Bracket | ||
| Basin Angle Gear/ Bevel Gear | ||
| Axle Shaft/ Half Shaft & Through Shaft | ||
| Axle Housing& Axle Assembly | ||
| Steering knuckle & Front Axle | ||
| Gear | ||
| Brake Drum& Wheel Hub | ||
| Flange | ||
| Bearing | ||
| Main Reducer Housing | ||
| Oil Seal Seat | ||
| Nut& Shim Series | ||
| Brake Backing Plate | ||
| Chassis Support Products | Leaf Spring Bracket | |
| Drop Arm Series | ||
| Bracket Series | ||
| Leaf Spring Shackle Series | ||
| Balanced Suspension Series | Balance Shaft Assembly | |
| Balance Shaft Housing | ||
| Axle Spring Seat | ||
| Thrust Rod | ||
| Balance Shaft Parts | ||
| Shock Absorber Series | Shock Absorber | |
| Shock Absorbing Airbag | ||
| Steering System | Power Steering Pump | |
| Power Steering Gear | ||
| Rubber Products | Oil Seal | |
| Rubber Support | ||
| Thrust Rod Rubber Core | ||
| Truck Belt | ||
| Engine support | ||
| Other | ||
| Clutch Series | Clutch Pressure Plate | |
| Clutch Disc | ||
| Flywheel Assembly | ||
| Flywheel Ring Gear | ||
| Adjusting Arm Series | ||
Function
Heavy trucks usually have double rear axles. If they are driven separately, they need to use 2 transmission shafts or add a transfer case at the output of the gearbox, which is heavy and cumbersome. Now a through shaft is designed in the middle axle to solve this problem. Only 1 transmission shaft is needed to drive 2 rear axles at the same time.
Förpackning och frakt
Exhibition
Vanliga frågor
Q1. Are you a factory or trading company?
We are a factory integrating research, development, production and sales.
Q2. What are the advantages of your products?
We support product customization to meet customer needs for special products. We can strictly control the products from raw materials to production, processing, product quality inspection, delivery, packaging, etc., and provide customers with high-end products and the most advantageous prices.
Q3. How about products price?
We are a factory, all products are direct sale at factory price. For the same price, we will provide the best quality; for the same quality, we have the most advantageous price.
Q4. What is your terms of packing?
We have branded packaging and neutral packaging, and we can also do what you want with authorization. This is flexible.
Q5. How to guarantee your after-sales service?
Strict inspection during production, Strictly check the products before shipment to ensure our packaging in good condition. Track and receive feedback from customer regularly. Our products warranty is 365 days.
Each product provides quality assurance service. If there is a problem with the product within the warranty period, the customer can negotiate with us in detail about the related claims, and we will do our best to satisfy the customer.
Certifications
/* 22 januari 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/)))
| Material: | 45#Steel, 42CrMo, 20crmoti |
|---|---|
| Ladda: | Drivaxel |
| Måttnoggrannhet för journaldiameter: | High Precision |
| Prover: |
US$ 29/Piece
1 styck (minsta beställning) | Beställ prov |
|---|
| Anpassning: |
Tillgänglig
| Anpassad förfrågan |
|---|
.shipping-cost-tm .tm-status-off{bakgrund: ingen;fyllning: 0;färg: #1470cc}
| Fraktkostnad:
Beräknad frakt per enhet. |
om fraktkostnad och beräknad leveranstid. |
|---|
| Betalningsmetod: |
|
|---|---|
|
Första betalningen Full betalning |
| Valuta: | US$ |
|---|
| Retur och återbetalning: | Du kan ansöka om återbetalning upp till 30 dagar efter att du mottagit produkterna. |
|---|
Are there any limitations or disadvantages associated with drive shafts?
While drive shafts are widely used and offer several advantages, they also have certain limitations and disadvantages that should be considered. Here’s a detailed explanation of the limitations and disadvantages associated with drive shafts:
1. Length and Misalignment Constraints:
Drive shafts have a maximum practical length due to factors such as material strength, weight considerations, and the need to maintain rigidity and minimize vibrations. Longer drive shafts can be prone to increased bending and torsional deflection, leading to reduced efficiency and potential driveline vibrations. Additionally, drive shafts require proper alignment between the driving and driven components. Misalignment can cause increased wear, vibrations, and premature failure of the drive shaft or its associated components.
2. Limited Operating Angles:
Drive shafts, especially those using U-joints, have limitations on operating angles. U-joints are typically designed to operate within specific angular ranges, and operating beyond these limits can result in reduced efficiency, increased vibrations, and accelerated wear. In applications requiring large operating angles, constant velocity (CV) joints are often used to maintain a constant speed and accommodate greater angles. However, CV joints may introduce higher complexity and cost compared to U-joints.
3. Maintenance Requirements:
Drive shafts require regular maintenance to ensure optimal performance and reliability. This includes periodic inspection, lubrication of joints, and balancing if necessary. Failure to perform routine maintenance can lead to increased wear, vibrations, and potential driveline issues. Maintenance requirements should be considered in terms of time and resources when using drive shafts in various applications.
4. Noise and Vibration:
Drive shafts can generate noise and vibrations, especially at high speeds or when operating at certain resonant frequencies. Imbalances, misalignment, worn joints, or other factors can contribute to increased noise and vibrations. These vibrations may affect the comfort of vehicle occupants, contribute to component fatigue, and require additional measures such as dampers or vibration isolation systems to mitigate their effects.
5. Weight and Space Constraints:
Drive shafts add weight to the overall system, which can be a consideration in weight-sensitive applications, such as automotive or aerospace industries. Additionally, drive shafts require physical space for installation. In compact or tightly packaged equipment or vehicles, accommodating the necessary drive shaft length and clearances can be challenging, requiring careful design and integration considerations.
6. Cost Considerations:
Drive shafts, depending on their design, materials, and manufacturing processes, can involve significant costs. Customized or specialized drive shafts tailored to specific equipment requirements may incur higher expenses. Additionally, incorporating advanced joint configurations, such as CV joints, can add complexity and cost to the drive shaft system.
7. Inherent Power Loss:
Drive shafts transmit power from the driving source to the driven components, but they also introduce some inherent power loss due to friction, bending, and other factors. This power loss can reduce overall system efficiency, particularly in long drive shafts or applications with high torque requirements. It is important to consider power loss when determining the appropriate drive shaft design and specifications.
8. Limited Torque Capacity:
While drive shafts can handle a wide range of torque loads, there are limits to their torque capacity. Exceeding the maximum torque capacity of a drive shaft can lead to premature failure, resulting in downtime and potential damage to other driveline components. It is crucial to select a drive shaft with sufficient torque capacity for the intended application.
Despite these limitations and disadvantages, drive shafts remain a widely used and effective means of power transmission in various industries. Manufacturers continuously work to address these limitations through advancements in materials, design techniques, joint configurations, and balancing processes. By carefully considering the specific application requirements and potential drawbacks, engineers and designers can mitigate the limitations and maximize the benefits of drive shafts in their respective systems.
Hur hanterar drivaxlar variationer i belastning och vibrationer under drift?
Drivaxlar är konstruerade för att hantera variationer i belastning och vibrationer under drift genom att använda olika mekanismer och funktioner. Dessa mekanismer hjälper till att säkerställa en smidig kraftöverföring, minimera vibrationer och bibehålla drivaxelns strukturella integritet. Här är en detaljerad förklaring av hur drivaxlar hanterar belastnings- och vibrationsvariationer:
1. Materialval och design:
Drivaxlar tillverkas vanligtvis av material med hög hållfasthet och styvhet, såsom stållegeringar eller kompositmaterial. Materialval och konstruktion tar hänsyn till de förväntade belastningarna och driftsförhållandena för applikationen. Genom att använda lämpliga material och optimera konstruktionen kan drivaxlar motstå de förväntade variationerna i belastning utan att uppleva överdriven nedböjning eller deformation.
2. Momentkapacitet:
Drivaxlar är konstruerade med en specifik momentkapacitet som motsvarar de förväntade belastningarna. Momentkapaciteten tar hänsyn till faktorer som drivkällans uteffekt och momentkraven för de drivna komponenterna. Genom att välja en drivaxel med tillräcklig momentkapacitet kan variationer i belastning hanteras utan att drivaxelns gränser överskrids och riskera fel eller skador.
3. Dynamisk balansering:
Under tillverkningsprocessen kan drivaxlar genomgå dynamisk balansering. Obalanser i drivaxeln kan resultera i vibrationer under drift. Genom balanseringsprocessen läggs vikter strategiskt till eller tas bort för att säkerställa att drivaxeln roterar jämnt och minimerar vibrationer. Dynamisk balansering hjälper till att mildra effekterna av belastningsvariationer och minskar risken för överdrivna vibrationer i drivaxeln.
4. Dämpare och vibrationskontroll:
Drivaxlar kan ha dämpare eller vibrationskontrollmekanismer för att ytterligare minimera vibrationer. Dessa enheter är vanligtvis utformade för att absorbera eller avleda vibrationer som kan uppstå på grund av belastningsvariationer eller andra faktorer. Dämpare kan vara i form av torsionsdämpare, gummiisolatorer eller andra vibrationsabsorberande element som är strategiskt placerade längs drivaxeln. Genom att hantera och dämpa vibrationer säkerställer drivaxlarna smidig drift och förbättrar systemets övergripande prestanda.
5. CV-leder:
CV-leder (Constant Velocity, CV) används ofta i drivaxlar för att hantera variationer i arbetsvinklar och för att bibehålla en konstant hastighet. CV-leder gör det möjligt för drivaxeln att överföra kraft även när de drivande och drivna komponenterna är i olika vinklar. Genom att hantera variationer i arbetsvinklar hjälper CV-leder till att minimera effekten av belastningsvariationer och minska potentiella vibrationer som kan uppstå till följd av förändringar i drivlinans geometri.
6. Smörjning och underhåll:
Korrekt smörjning och regelbundet underhåll är avgörande för att drivaxlar ska kunna hantera belastnings- och vibrationsvariationer effektivt. Smörjning bidrar till att minska friktionen mellan rörliga delar, vilket minimerar slitage och värmeutveckling. Regelbundet underhåll, inklusive inspektion och smörjning av leder, säkerställer att drivaxeln förblir i optimalt skick, vilket minskar risken för fel eller prestandaförsämring på grund av belastningsvariationer.
7. Strukturell styvhet:
Drivaxlar är konstruerade för att ha tillräcklig strukturell styvhet för att motstå böjnings- och vridkrafter. Denna styvhet bidrar till att bibehålla drivaxelns integritet när den utsätts för belastningsvariationer. Genom att minimera nedböjning och bibehålla strukturell integritet kan drivaxeln effektivt överföra kraft och hantera variationer i belastning utan att kompromissa med prestandan eller introducera alltför stora vibrationer.
8. Styrsystem och återkoppling:
I vissa tillämpningar kan drivaxlar vara utrustade med styrsystem som aktivt övervakar och justerar parametrar som vridmoment, hastighet och vibration. Dessa styrsystem använder sensorer och återkopplingsmekanismer för att upptäcka variationer i belastning eller vibrationer och göra justeringar i realtid för att optimera prestandan. Genom att aktivt hantera belastningsvariationer och vibrationer kan drivaxlar anpassa sig till förändrade driftsförhållanden och upprätthålla smidig drift.
Sammanfattningsvis hanterar drivaxlar variationer i belastning och vibrationer under drift genom noggrant materialval och design, hänsyn till momentkapacitet, dynamisk balansering, integration av dämpare och vibrationskontrollmekanismer, användning av CV-leder, korrekt smörjning och underhåll, strukturell styvhet och, i vissa fall, styrsystem och återkopplingsmekanismer. Genom att integrera dessa funktioner och mekanismer säkerställer drivaxlar tillförlitlig och effektiv kraftöverföring samtidigt som de minimerar effekten av belastningsvariationer och vibrationer på den totala systemets prestanda.
How do drive shafts handle variations in length and torque requirements?
Drive shafts are designed to handle variations in length and torque requirements in order to efficiently transmit rotational power. Here’s an explanation of how drive shafts address these variations:
Length Variations:
Drive shafts are available in different lengths to accommodate varying distances between the engine or power source and the driven components. They can be custom-made or purchased in standardized lengths, depending on the specific application. In situations where the distance between the engine and the driven components is longer, multiple drive shafts with appropriate couplings or universal joints can be used to bridge the gap. These additional drive shafts effectively extend the overall length of the power transmission system.
Additionally, some drive shafts are designed with telescopic sections. These sections can be extended or retracted, allowing for adjustments in length to accommodate different vehicle configurations or dynamic movements. Telescopic drive shafts are commonly used in applications where the distance between the engine and the driven components may change, such as in certain types of trucks, buses, and off-road vehicles.
Torque Requirements:
Drive shafts are engineered to handle varying torque requirements based on the power output of the engine or power source and the demands of the driven components. The torque transmitted through the drive shaft depends on factors such as the engine power, load conditions, and the resistance encountered by the driven components.
Manufacturers consider torque requirements when selecting the appropriate materials and dimensions for drive shafts. Drive shafts are typically made from high-strength materials, such as steel or aluminum alloys, to withstand the torque loads without deformation or failure. The diameter, wall thickness, and design of the drive shaft are carefully calculated to ensure it can handle the expected torque without excessive deflection or vibration.
In applications with high torque demands, such as heavy-duty trucks, industrial machinery, or performance vehicles, drive shafts may have additional reinforcements. These reinforcements can include thicker walls, cross-sectional shapes optimized for strength, or composite materials with superior torque-handling capabilities.
Furthermore, drive shafts often incorporate flexible joints, such as universal joints or constant velocity (CV) joints. These joints allow for angular misalignment and compensate for variations in the operating angles between the engine, transmission, and driven components. They also help absorb vibrations and shocks, reducing stress on the drive shaft and enhancing its torque-handling capacity.
In summary, drive shafts handle variations in length and torque requirements through customizable lengths, telescopic sections, appropriate materials and dimensions, and the inclusion of flexible joints. By carefully considering these factors, drive shafts can efficiently and reliably transmit power while accommodating the specific needs of different applications.
editor by CX 2024-03-15
