Product Description
Product Description:
1. This series’ wheel chassis makes use of the 2571 most recent updated system which assimilated mature technologies from a lot of domestic makes. More reasonable construction minimums the malfunction charge in the procedure of making use of.
two. Four-stroke engines with high torque reserve. Engines are from YTO and WeiChai
three. (4+1)×2 transmission structure with 8F +2R gears. Eight forward gears and 2 rear gears
4. Equip with double speed of PTO shaft 540/720 rpm. Adapted to different area type.
five. Adopt complete hydraulic steering, unbiased gasoline tank, straightforward operating and high mobility.
6. Adjustable front and rear tracks meet agricultural demands of distinct regions. Extra-large h2o tank and substantial capability routine maintenance-cost-free battery make the device with greatest heat-dispersion and starting overall performance.
seven. Steering method makes use of orbit hydrostatic steering equipment with rotary valve. Flexible to run with a much more trustworthy and stable overall performance.
8. Differential lock avoid rear wheels skidding when climbing, functioning in paddy land and rainy weather conditions.
9. Optional Tools: one or double hydraulic output method, air brake, side shift, strong hydraulic lifter, streamlined hood, wheel guards, different dimensions tires.
Priduct photo
| Model | TK504 | TK604 | TK704 | TK804 | ||
| Type | 4×4 Wheeled Sort | 4×4 Wheeled Sort | 4×4 Wheeled Sort | 4×4 Wheeled Variety | ||
| Dimensions of Tractor (mm) |
Length | 3200 | 3200 | 3500 | 3700 | |
| Width | 1515 | 1515 | 1610 | 1610 | ||
| Height | 1830 | 1830 | 1860 | 1860 | ||
| Tread | Entrance Wheel | 1250 | 1250 | 1300 | 1300 | |
| Rear Wheel | 1200,1300(typical),1400 | 1200,1300(normal),1400 | 1200,1300(common),1400 | 1200,1300(typical),1400 | ||
| Wheel Foundation | 2571 | 2571 | 2200 | 2200 | ||
| Min. Ground Foundation | 325(the bottom of steering horizontal pulling rod) | 325(the bottom of steering horizontal pulling rod) | 390(the bottom of steering horizontal pulling rod) | 390(the base of steering horizontal pulling rod) | ||
| Min. Utilization Mass (kg) | 2160 | 2160 | 2300 | 2300 | ||
| Engine | Model | quanchai498 | quanchai4105 | quanchai4108T70 | quanchai4108T80 | |
| Type | Vertical, water cooled and 4-stroke | Vertical, water cooled and 4-stroke | Vertical, water cooled and 4-stroke | Vertical, drinking water cooled and 4-stroke | ||
| Rated Electrical power(kw) | 36.8 | forty four.one | 51.four | fifty eight.eight | ||
| Rated Rev.(r/min) | 2300 | 2400 | 2400 | 2400 | ||
| Fuel | Diesel Oil | Diesel Oil | Diesel Oil | Diesel Oil | ||
| Tire | Front Wheel | six.5-16 | six.5-sixteen | 7.5-sixteen | 7.5-16 | |
| Rear Wheel | eleven.2-24 | 11.2-24 | 11.2-28 | eleven.2-28 | ||
| Clutch | dry-friction, one disc and 2 stage | dry-friction, solitary disc and 2 stage | dry-friction, single disc and 2 phase | dry-friction, one disc and 2 phase | ||
| Steering | Hydraulic kind | Hydraulic kind | Hydraulic variety | Hydraulic variety | ||
| Transmission Box | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | ||
| Suspension Type | Put up Positioned Tri-point Suspension Catalogue II | Submit Positioned Tri-level Suspension Catalogue II | Post Positioned Tri-level Suspension Catalogue II | Publish Positioned Tri-level Suspension Catalogue II | ||
| PTO | Kind and Rev.(r/min) | Submit-place, half-independent, 540/760 or 540/a thousand(optional) |
Post-place, 50 %-unbiased, 540/760 or 540/a thousand(optional) |
Submit-situation, unbiased, 540/760 or 540/one thousand(optional) |
Put up-place,unbiased, 540/760 or 540/1000(optional) |
|
| Spline Dimensions | I38 Rectangle Spline with 8 enamel | I38 Rectangle Spline with 8 teeth | I38 Rectangle Spline with 8 tooth | I38 Rectangle Spline with 8 tooth | ||
Common Equipments:
Engine,4 Cylinders,8+2 Equipment Change,With Dual-Phase Clutch,Electrical power Steering,Trailer outlet,
security plate,Tires:8.3-24/fourteen.9-thirty,hand throttle wire ,4×4 Wheel Drive,3-Stage Linkage,
Rear PTO 540/760, Color follow your need.
Possibilities:
Taxi,Canopy,Air Brake,Tilting Draw Bar, Entrance conclude loader,backhoe
You can also choose any tools
Packaging & Supply:
FCL&LCL
Firm Details:
Telake (HangZhou) Agricultural tools Co., Ltd. mainly generates medium and huge horsepower wheeled tractors and supporting a variety of agricultural equipment and instruments. The primary items of the firm protect all varieties of wheeled tractors with 25 horsepower to 260 horsepower, and the corresponding agricultural equipment and tools. At existing, the goods are marketed all over the nation and far more than 10 nations around the world and regions overseas. Among them, the medium-horsepower wheeled tractors are in the leading position in the sector in phrases of technology and good quality. The business has robust specialized drive, robust advancement capability, best detection indicates and complete publish-sale service technique.
OUR SERVICES
1. Free of charge tool box and totally free effortless harm areas.
two. Warranty time: eighteen months after the items delivery your port.
three. Delivery time: 20 days for 1 container.
4.1 units in 1 20FT container. 3units in 1 40FT container.
five. Every colour we can do for you.
six. We can do the tractor with your brand in your order. (It Is Cost-free)
seven. Payment time period: T/T30% in progress, 70% T/T soon after the delivery, or L/C at sight.
| Warranty: | 1year |
|---|---|
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro II |
###
| Samples: |
US$ 3920/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | TK504 | TK604 | TK704 | TK804 | ||
| Type | 4×4 Wheeled Type | 4×4 Wheeled Type | 4×4 Wheeled Type | 4×4 Wheeled Type | ||
| Dimensions of Tractor (mm) |
Length | 3200 | 3200 | 3500 | 3700 | |
| Width | 1515 | 1515 | 1610 | 1610 | ||
| Height | 1830 | 1830 | 1860 | 1860 | ||
| Tread | Front Wheel | 1250 | 1250 | 1300 | 1300 | |
| Rear Wheel | 1200,1300(usual),1400 | 1200,1300(usual),1400 | 1200,1300(usual),1400 | 1200,1300(usual),1400 | ||
| Wheel Base | 2010 | 2010 | 2200 | 2200 | ||
| Min. Ground Base | 325(the bottom of steering horizontal pulling rod) | 325(the bottom of steering horizontal pulling rod) | 390(the bottom of steering horizontal pulling rod) | 390(the bottom of steering horizontal pulling rod) | ||
| Min. Usage Mass (kg) | 2160 | 2160 | 2300 | 2300 | ||
| Engine | Model | quanchai498 | quanchai4105 | quanchai4108T70 | quanchai4108T80 | |
| Type | Vertical, water cooled and 4-stroke | Vertical, water cooled and 4-stroke | Vertical, water cooled and 4-stroke | Vertical, water cooled and 4-stroke | ||
| Rated Power(kw) | 36.8 | 44.1 | 51.4 | 58.8 | ||
| Rated Rev.(r/min) | 2300 | 2400 | 2400 | 2400 | ||
| Fuel | Diesel Oil | Diesel Oil | Diesel Oil | Diesel Oil | ||
| Tire | Front Wheel | 6.5-16 | 6.5-16 | 7.5-16 | 7.5-16 | |
| Rear Wheel | 11.2-24 | 11.2-24 | 11.2-28 | 11.2-28 | ||
| Clutch | dry-friction, single disc and two stage | dry-friction, single disc and two stage | dry-friction, single disc and two stage | dry-friction, single disc and two stage | ||
| Steering | Hydraulic type | Hydraulic type | Hydraulic type | Hydraulic type | ||
| Transmission Box | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | ||
| Suspension Type | Post Positioned Tri-point Suspension Catalogue II | Post Positioned Tri-point Suspension Catalogue II | Post Positioned Tri-point Suspension Catalogue II | Post Positioned Tri-point Suspension Catalogue II | ||
| PTO | Type and Rev.(r/min) | Post-position, half-independent, 540/760 or 540/1000(optional) |
Post-position, half-independent, 540/760 or 540/1000(optional) |
Post-position, independent, 540/760 or 540/1000(optional) |
Post-position,independent, 540/760 or 540/1000(optional) |
|
| Spline Size | I38 Rectangle Spline with 8 teeth | I38 Rectangle Spline with 8 teeth | I38 Rectangle Spline with 8 teeth | I38 Rectangle Spline with 8 teeth | ||
| Warranty: | 1year |
|---|---|
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro II |
###
| Samples: |
US$ 3920/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | TK504 | TK604 | TK704 | TK804 | ||
| Type | 4×4 Wheeled Type | 4×4 Wheeled Type | 4×4 Wheeled Type | 4×4 Wheeled Type | ||
| Dimensions of Tractor (mm) |
Length | 3200 | 3200 | 3500 | 3700 | |
| Width | 1515 | 1515 | 1610 | 1610 | ||
| Height | 1830 | 1830 | 1860 | 1860 | ||
| Tread | Front Wheel | 1250 | 1250 | 1300 | 1300 | |
| Rear Wheel | 1200,1300(usual),1400 | 1200,1300(usual),1400 | 1200,1300(usual),1400 | 1200,1300(usual),1400 | ||
| Wheel Base | 2010 | 2010 | 2200 | 2200 | ||
| Min. Ground Base | 325(the bottom of steering horizontal pulling rod) | 325(the bottom of steering horizontal pulling rod) | 390(the bottom of steering horizontal pulling rod) | 390(the bottom of steering horizontal pulling rod) | ||
| Min. Usage Mass (kg) | 2160 | 2160 | 2300 | 2300 | ||
| Engine | Model | quanchai498 | quanchai4105 | quanchai4108T70 | quanchai4108T80 | |
| Type | Vertical, water cooled and 4-stroke | Vertical, water cooled and 4-stroke | Vertical, water cooled and 4-stroke | Vertical, water cooled and 4-stroke | ||
| Rated Power(kw) | 36.8 | 44.1 | 51.4 | 58.8 | ||
| Rated Rev.(r/min) | 2300 | 2400 | 2400 | 2400 | ||
| Fuel | Diesel Oil | Diesel Oil | Diesel Oil | Diesel Oil | ||
| Tire | Front Wheel | 6.5-16 | 6.5-16 | 7.5-16 | 7.5-16 | |
| Rear Wheel | 11.2-24 | 11.2-24 | 11.2-28 | 11.2-28 | ||
| Clutch | dry-friction, single disc and two stage | dry-friction, single disc and two stage | dry-friction, single disc and two stage | dry-friction, single disc and two stage | ||
| Steering | Hydraulic type | Hydraulic type | Hydraulic type | Hydraulic type | ||
| Transmission Box | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | two shafts, 2×(4+1) composed | ||
| Suspension Type | Post Positioned Tri-point Suspension Catalogue II | Post Positioned Tri-point Suspension Catalogue II | Post Positioned Tri-point Suspension Catalogue II | Post Positioned Tri-point Suspension Catalogue II | ||
| PTO | Type and Rev.(r/min) | Post-position, half-independent, 540/760 or 540/1000(optional) |
Post-position, half-independent, 540/760 or 540/1000(optional) |
Post-position, independent, 540/760 or 540/1000(optional) |
Post-position,independent, 540/760 or 540/1000(optional) |
|
| Spline Size | I38 Rectangle Spline with 8 teeth | I38 Rectangle Spline with 8 teeth | I38 Rectangle Spline with 8 teeth | I38 Rectangle Spline with 8 teeth | ||
Choosing the Right PTO Shaft For Your Tractor
There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.
IID shaft
When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.
Reverse PTO
Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Square rigid shaft
When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Economy PTO
There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
editor by czh 2023-01-09
