Produktbeschreibung
Customized High Precision Spare Parts Auto/Truck/Drive/Gear/Spline/Propeller/Half/Sleeve/Machinery/Sliding/Transmission Axle Shaft 42CrMo 20CrMoTi
(1) Accessory products of the truck, the product quality is stable and reliable.
(2) Forged with 42CrMo material and heat treated and tempered for 32 degrees, so that the half shaft has stronger toughness and is not easy to break and bend.
(3) Processed in the machining center, ensure that the products have rigorous dimensional coordinates to ensure 100% qualified rate of products.
(4) Products are inspected 1 by 1 and delivered out of the warehouse, with unified laser identification to ensure product traceability.
(5) Various sizes of axle shafts can be customized to meet customer needs.
(6) The unified brand carton, inner bag and integral foam packaging, which is strong and beautiful.
Factory Show
More Products
| Truck Model | Sinotruk, Shacman, CZPT Auman, CZPT Xihu (West Lake) Dis., Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.feng Liuqi Balong, North BENZ( BEIBEN), C&C, JAC, etc. | |
| Product catalogue | Axle | Wheel Assembly |
| Differential Assembly | ||
| Main Reducer Assembly | ||
| Inner Ring Gear& Bracket | ||
| Basin Angle Gear/ Bevel Gear | ||
| Axle Shaft/ Half Shaft & Through Shaft | ||
| Axle Housing& Axle Assembly | ||
| Steering knuckle & Front Axle | ||
| Gear | ||
| Brake Drum& Wheel Hub | ||
| Flange | ||
| Bearing | ||
| Main Reducer Housing | ||
| Oil Seal Seat | ||
| Nut& Shim Series | ||
| Brake Backing Plate | ||
| Chassis Support Products | Leaf Spring Bracket | |
| Drop Arm Series | ||
| Bracket Series | ||
| Leaf Spring Shackle Series | ||
| Balanced Suspension Series | Balance Shaft Assembly | |
| Balance Shaft Housing | ||
| Axle Spring Seat | ||
| Thrust Rod | ||
| Balance Shaft Parts | ||
| Shock Absorber Series | Shock Absorber | |
| Shock Absorbing Airbag | ||
| Steering System | Power Steering Pump | |
| Power Steering Gear | ||
| Rubber Products | Oil Seal | |
| Rubber Support | ||
| Thrust Rod Rubber Core | ||
| Truck Belt | ||
| Engine support | ||
| Other | ||
| Clutch Series | Clutch Pressure Plate | |
| Clutch Disc | ||
| Flywheel Assembly | ||
| Flywheel Ring Gear | ||
| Adjusting Arm Series | ||
Funktion
Heavy trucks usually have double rear axles. If they are driven separately, they need to use 2 transmission shafts or add a transfer case at the output of the gearbox, which is heavy and cumbersome. Now a through shaft is designed in the middle axle to solve this problem. Only 1 transmission shaft is needed to drive 2 rear axles at the same time.
Packaging & Shipping
Exhibition
Häufig gestellte Fragen
Q1. Are you a factory or trading company?
We are a factory integrating research, development, production and sales.
Q2. What are the advantages of your products?
We support product customization to meet customer needs for special products. We can strictly control the products from raw materials to production, processing, product quality inspection, delivery, packaging, etc., and provide customers with high-end products and the most advantageous prices.
Q3. How about products price?
We are a factory, all products are direct sale at factory price. For the same price, we will provide the best quality; for the same quality, we have the most advantageous price.
Q4. What is your terms of packing?
We have branded packaging and neutral packaging, and we can also do what you want with authorization. This is flexible.
Q5. How to guarantee your after-sales service?
Strict inspection during production, Strictly check the products before shipment to ensure our packaging in good condition. Track and receive feedback from customer regularly. Our products warranty is 365 days.
Each product provides quality assurance service. If there is a problem with the product within the warranty period, the customer can negotiate with us in detail about the related claims, and we will do our best to satisfy the customer.
Certifications
/* 22. Januar 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | 45#Steel, 42CrMo, 20crmoti |
|---|---|
| Laden: | Antriebswelle |
| Maßgenauigkeit des Zapfendurchmessers: | Hohe Präzision |
| Proben: |
US$ 29/Piece
1 Stück (Mindestbestellmenge) | Muster bestellen |
|---|
| Anpassung: |
Verfügbar
| Kundenspezifische Anfrage |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Versandkosten:
Geschätzte Frachtkosten pro Einheit. |
über Versandkosten und voraussichtliche Lieferzeit. |
|---|
| Zahlungsmethode: |
|
|---|---|
|
Erste Zahlung Vollständige Zahlung |
| Währung: | US$ |
|---|
| Rückgabe & Erstattung: | Sie können bis zu 30 Tage nach Erhalt der Produkte eine Rückerstattung beantragen. |
|---|
What maintenance practices are crucial for prolonging the lifespan of drive shafts?
To prolong the lifespan of drive shafts and ensure their optimal performance, several maintenance practices are crucial. Regular maintenance helps identify and address potential issues before they escalate, reduces wear and tear, and ensures the drive shaft operates smoothly and efficiently. Here are some essential maintenance practices for prolonging the lifespan of drive shafts:
1. Regular Inspection:
Performing regular inspections is vital for detecting any signs of wear, damage, or misalignment. Inspect the drive shaft visually, looking for cracks, dents, or any signs of excessive wear on the shaft itself and its associated components such as joints, yokes, and splines. Check for any signs of lubrication leaks or contamination. Additionally, inspect the fasteners and mounting points to ensure they are secure. Early detection of any issues allows for timely repairs or replacements, preventing further damage to the drive shaft.
2. Lubrication:
Proper lubrication is essential for the smooth operation and longevity of drive shafts. Lubricate the joints, such as universal joints or constant velocity joints, as recommended by the manufacturer. Lubrication reduces friction, minimizes wear, and helps dissipate heat generated during operation. Use the appropriate lubricant specified for the specific drive shaft and application, considering factors such as temperature, load, and operating conditions. Regularly check the lubrication levels and replenish as necessary to ensure optimal performance and prevent premature failure.
3. Balancing and Alignment:
Maintaining proper balancing and alignment is crucial for the lifespan of drive shafts. Imbalances or misalignments can lead to vibrations, accelerated wear, and potential failure. If vibrations or unusual noises are detected during operation, it is important to address them promptly. Perform balancing procedures as necessary, including dynamic balancing, to ensure even weight distribution along the drive shaft. Additionally, verify that the drive shaft is correctly aligned with the engine or power source and the driven components. Misalignment can cause excessive stress on the drive shaft, leading to premature failure.
4. Protective Coatings:
Applying protective coatings can help prolong the lifespan of drive shafts, particularly in applications exposed to harsh environments or corrosive substances. Consider using coatings such as zinc plating, powder coating, or specialized corrosion-resistant coatings to enhance the drive shaft’s resistance to corrosion, rust, and chemical damage. Regularly inspect the coating for any signs of degradation or damage, and reapply or repair as necessary to maintain the protective barrier.
5. Torque and Fastener Checks:
Ensure that the drive shaft’s fasteners, such as bolts, nuts, or clamps, are properly torqued and secured according to the manufacturer’s specifications. Loose or improperly tightened fasteners can lead to excessive vibrations, misalignment, or even detachment of the drive shaft. Periodically check and retighten the fasteners as recommended or after any maintenance or repair procedures. Additionally, monitor the torque levels during operation to ensure they remain within the specified range, as excessive torque can strain the drive shaft and lead to premature failure.
6. Environmental Protection:
Protecting the drive shaft from environmental factors can significantly extend its lifespan. In applications exposed to extreme temperatures, moisture, chemicals, or abrasive substances, take appropriate measures to shield the drive shaft. This may include using protective covers, seals, or guards to prevent contaminants from entering and causing damage. Regular cleaning of the drive shaft, especially in dirty or corrosive environments, can also help remove debris and prevent buildup that could compromise its performance and longevity.
7. Manufacturer Guidelines:
Follow the manufacturer’s guidelines and recommendations for maintenance practices specific to the drive shaft model and application. The manufacturer’s instructions may include specific intervals for inspections, lubrication, balancing, or other maintenance tasks. Adhering to these guidelines ensures that the drive shaft is properly maintained and serviced, maximizing its lifespan and minimizing the risk of unexpected failures.
By implementing these maintenance practices, drive shafts can operate reliably, maintain efficient power transmission, and have an extended service life, ultimately reducing downtime and ensuring optimal performance in various applications.
How do drive shafts handle variations in load and vibration during operation?
Drive shafts are designed to handle variations in load and vibration during operation by employing various mechanisms and features. These mechanisms help ensure smooth power transmission, minimize vibrations, and maintain the structural integrity of the drive shaft. Here’s a detailed explanation of how drive shafts handle load and vibration variations:
1. Material Selection and Design:
Drive shafts are typically made from materials with high strength and stiffness, such as steel alloys or composite materials. The material selection and design take into account the anticipated loads and operating conditions of the application. By using appropriate materials and optimizing the design, drive shafts can withstand the expected variations in load without experiencing excessive deflection or deformation.
2. Torque Capacity:
Drive shafts are designed with a specific torque capacity that corresponds to the expected loads. The torque capacity takes into account factors such as the power output of the driving source and the torque requirements of the driven components. By selecting a drive shaft with sufficient torque capacity, variations in load can be accommodated without exceeding the drive shaft’s limits and risking failure or damage.
3. Dynamic Balancing:
During the manufacturing process, drive shafts can undergo dynamic balancing. Imbalances in the drive shaft can result in vibrations during operation. Through the balancing process, weights are strategically added or removed to ensure that the drive shaft spins evenly and minimizes vibrations. Dynamic balancing helps to mitigate the effects of load variations and reduces the potential for excessive vibrations in the drive shaft.
4. Dampers and Vibration Control:
Drive shafts can incorporate dampers or vibration control mechanisms to further minimize vibrations. These devices are typically designed to absorb or dissipate vibrations that may arise from load variations or other factors. Dampers can be in the form of torsional dampers, rubber isolators, or other vibration-absorbing elements strategically placed along the drive shaft. By managing and attenuating vibrations, drive shafts ensure smooth operation and enhance overall system performance.
5. CV Joints:
Constant Velocity (CV) joints are often used in drive shafts to accommodate variations in operating angles and to maintain a constant speed. CV joints allow the drive shaft to transmit power even when the driving and driven components are at different angles. By accommodating variations in operating angles, CV joints help minimize the impact of load variations and reduce potential vibrations that may arise from changes in the driveline geometry.
6. Lubrication and Maintenance:
Proper lubrication and regular maintenance are essential for drive shafts to handle load and vibration variations effectively. Lubrication helps reduce friction between moving parts, minimizing wear and heat generation. Regular maintenance, including inspection and lubrication of joints, ensures that the drive shaft remains in optimal condition, reducing the risk of failure or performance degradation due to load variations.
7. Structural Rigidity:
Drive shafts are designed to have sufficient structural rigidity to resist bending and torsional forces. This rigidity helps maintain the integrity of the drive shaft when subjected to load variations. By minimizing deflection and maintaining structural integrity, the drive shaft can effectively transmit power and handle variations in load without compromising performance or introducing excessive vibrations.
8. Control Systems and Feedback:
In some applications, drive shafts may be equipped with control systems that actively monitor and adjust parameters such as torque, speed, and vibration. These control systems use sensors and feedback mechanisms to detect variations in load or vibrations and make real-time adjustments to optimize performance. By actively managing load variations and vibrations, drive shafts can adapt to changing operating conditions and maintain smooth operation.
In summary, drive shafts handle variations in load and vibration during operation through careful material selection and design, torque capacity considerations, dynamic balancing, integration of dampers and vibration control mechanisms, utilization of CV joints, proper lubrication and maintenance, structural rigidity, and, in some cases, control systems and feedback mechanisms. By incorporating these features and mechanisms, drive shafts ensure reliable and efficient power transmission while minimizing the impact of load variations and vibrations on overall system performance.
Welchen Beitrag leisten Antriebswellen zur Übertragung von Rotationsenergie in verschiedenen Anwendungen?
Antriebswellen spielen eine entscheidende Rolle bei der Übertragung der Rotationsenergie vom Motor oder der Energiequelle auf die Räder oder angetriebenen Bauteile in verschiedenen Anwendungen. Ob in Fahrzeugen oder Maschinen – Antriebswellen ermöglichen eine effiziente Kraftübertragung und tragen zum Funktionieren verschiedener Systeme bei. Hier finden Sie eine detaillierte Erklärung, wie Antriebswellen zur Übertragung der Rotationsenergie beitragen:
1. Fahrzeuganwendungen:
In Fahrzeugen übertragen Antriebswellen die Drehbewegung des Motors auf die Räder und ermöglichen so die Fortbewegung. Die Antriebswelle verbindet die Abtriebswelle des Getriebes mit dem Differenzial, welches die Kraftverteilung auf die Räder übernimmt. Das vom Motor erzeugte Drehmoment wird über die Antriebswelle auf die Räder übertragen und treibt das Fahrzeug an. Diese Kraftübertragung ermöglicht es dem Fahrzeug, zu beschleunigen, die Geschwindigkeit zu halten und Widerstände wie Reibung und Steigungen zu überwinden.
2. Anwendungen im Maschinenbau:
In Maschinen dienen Antriebswellen der Übertragung von Drehbewegungen vom Motor auf verschiedene angetriebene Komponenten. Beispielsweise werden sie in Industriemaschinen eingesetzt, um Pumpen, Generatoren, Förderbänder oder andere mechanische Systeme anzutreiben. In der Landwirtschaft verbinden Antriebswellen üblicherweise die Energiequelle mit Geräten wie Mähdreschern, Ballenpressen oder Bewässerungsanlagen. Sie ermöglichen es diesen Maschinen, ihre vorgesehenen Funktionen zu erfüllen, indem sie die benötigten Komponenten mit Drehbewegungen versorgen.
3. Kraftübertragung:
Antriebswellen sind so konstruiert, dass sie Rotationsenergie effizient und zuverlässig übertragen. Sie können erhebliche Drehmomente vom Motor auf die Räder oder angetriebenen Bauteile übertragen. Das vom Motor erzeugte Drehmoment wird über die Antriebswelle ohne nennenswerte Leistungsverluste übertragen. Durch die starre Verbindung zwischen Motor und angetriebenen Bauteilen gewährleisten Antriebswellen, dass die vom Motor erzeugte Leistung effektiv für die Verrichtung von Arbeit genutzt wird.
4. Flexible Kupplung:
Eine der Hauptfunktionen von Antriebswellen besteht darin, eine flexible Verbindung zwischen Motor/Getriebe und den Rädern bzw. angetriebenen Komponenten herzustellen. Diese Flexibilität ermöglicht es der Antriebswelle, Winkelbewegungen aufzunehmen und Fehlausrichtungen zwischen Motor und angetriebenem System auszugleichen. Bei Fahrzeugen, wenn sich das Fahrwerk bewegt oder die Räder auf unebenem Gelände fahren, passt die Antriebswelle ihre Länge und ihren Winkel an, um eine konstante Kraftübertragung zu gewährleisten. Diese Flexibilität trägt dazu bei, übermäßige Belastungen der Antriebskomponenten zu vermeiden und eine gleichmäßige Kraftübertragung sicherzustellen.
5. Drehmoment- und Geschwindigkeitsübertragung:
Antriebswellen übertragen Drehmoment und Drehzahl. Das Drehmoment ist die vom Motor oder der Energiequelle erzeugte Rotationskraft, die Drehzahl die Anzahl der Umdrehungen pro Minute (U/min). Antriebswellen müssen die Drehmomentanforderungen der Anwendung ohne übermäßige Verdrehung oder Biegung bewältigen können. Zudem müssen sie die gewünschte Drehzahl beibehalten, um die einwandfreie Funktion der angetriebenen Komponenten zu gewährleisten. Eine optimale Konstruktion, die richtige Materialauswahl und die Auswuchtung der Antriebswellen tragen zu einer effizienten Drehmoment- und Drehzahlübertragung bei.
6. Länge und Balance:
Die Länge und Wuchtung von Antriebswellen sind entscheidend für deren Leistungsfähigkeit. Die Länge der Antriebswelle wird durch den Abstand zwischen Motor bzw. Antriebsquelle und den angetriebenen Komponenten bestimmt. Sie muss entsprechend dimensioniert sein, um übermäßige Vibrationen oder Verformungen zu vermeiden. Antriebswellen werden sorgfältig gewuchtet, um Vibrationen und Rotationsunwuchten zu minimieren, welche die Gesamtleistung, den Komfort und die Lebensdauer des Antriebsstrangs beeinträchtigen können.
7. Sicherheit und Wartung:
Antriebswellen erfordern geeignete Sicherheitsvorkehrungen und regelmäßige Wartung. In Fahrzeugen sind Antriebswellen häufig in einem Schutzrohr oder Gehäuse eingeschlossen, um den Kontakt mit beweglichen Teilen zu verhindern und so das Verletzungsrisiko zu reduzieren. Auch in Maschinen können freiliegende Antriebswellen mit Schutzabdeckungen versehen werden, um die Bediener vor potenziellen Gefahren zu schützen. Zur regelmäßigen Wartung gehören die Überprüfung der Antriebswelle auf Verschleiß, Beschädigungen oder Fehlausrichtung sowie die Sicherstellung der ordnungsgemäßen Schmierung der Kreuzgelenke. Diese Maßnahmen tragen dazu bei, Ausfälle zu vermeiden, eine optimale Leistung zu gewährleisten und die Lebensdauer der Antriebswelle zu verlängern.
Zusammenfassend lässt sich sagen, dass Antriebswellen eine entscheidende Rolle bei der Übertragung von Rotationsenergie in verschiedenen Anwendungen spielen. Ob in Fahrzeugen oder Maschinen – Antriebswellen ermöglichen eine effiziente Kraftübertragung vom Motor bzw. der Energiequelle auf die Räder oder angetriebenen Komponenten. Sie bieten eine flexible Verbindung, übertragen Drehmoment und Drehzahl, gleichen Winkelbewegungen aus und tragen zur Sicherheit und Wartung des Systems bei. Durch die effektive Übertragung von Rotationsenergie ermöglichen Antriebswellen die Funktion und Leistungsfähigkeit von Fahrzeugen und Maschinen in zahlreichen Branchen.
editor by CX 2024-04-09
